彩繪膜系列
LED彩光系列
透光膜系列
3D造型系列服務導航
Product categories
您當前位置：首頁>工程動態工程動態
軟膜膜構造的支承構造和各項聯接構造應契合以下規范：
發表時間：2016-11-25 09:28:12 發表作者：phpcms 瀏覽次數：
提升檔次和品位,軟膜天花助你一臂之力 膜構造的支承構造和各項聯接構造應契合以下規范：
To enhance the quality and grade of soft film smallpox help you a helping hand film structure, support structure and the connecting structure should conform to the following specifications:
1、確保聯接的安全、合理、美麗。
1, to ensure that the connection is safe, reasonable and beautiful.
2、聯接件應具有足夠的強度、剛度和耐久性，應不先于所聯接的膜材、拉索或鋼構件損壞，并不發作影響構造受力功用的變形。聯接處的膜材應不先于其它部位的膜材損壞。
The 2 connecting parts should have sufficient strength, stiffness and durability, should not precede the membrane material and the connecting cable or steel parts damaged, does not attack force function of the influence of tectonic deformation. The membrane material of the joint should not be damaged before the other parts of the membrane.
3、聯接件應傳力牢靠，并削減聯接處應力會集。
3, joint force should be firm, and cut joint stress convergence.
4、節點構造應契合計算假定。應思考節點構造偏心對拉索、膜材發作的影響，施加預張力的辦法、構造裝置答應誤差，以及進行二次張拉的也許性。
4, node structure should be fit to calculate the assumption. The influence of the structure of the joints on the attack of the cable and the membrane material, the method of pre tension, the error of the construction device, and the possibility of the two tensile stress should be considered.
5、在膜材聯接處應堅持高度水密性，應采取必定的構造辦法防止膜材磨損和撕裂。
5, at the junction of the membrane material should adhere to a high degree of water tightness, should take a certain structural measures to prevent the wear and tear of the film.
6、對金屬聯接件應選用牢靠的防腐蝕辦法。 7、在支承構件與膜材的聯接處不得有毛刺、尖角、尖點。
6, the metal connection pieces should choose a reliable anti-corrosion measures. 7, the connection point of the support member and the membrane material remove burrs and sharp edges, sharp point.
膜構造的支承構造和各項聯接構造應契合以下規范：
The supporting structure of the membrane structure and the connection structure should meet the following specifications:
1、確保聯接的安全、合理、美麗。
1, to ensure that the connection is safe, reasonable and beautiful.
2、聯接件應具有足夠的強度、剛度和耐久性，應不先于所聯接的膜材、拉索或鋼構件損壞，并不發作影響構造受力功用的變形。聯接處的膜材應不先于其它部位的膜材損壞。
The 2 connecting parts should have sufficient strength, stiffness and durability, should not precede the membrane material and the connecting cable or steel parts damaged, does not attack force function of the influence of tectonic deformation. The membrane material of the joint should not be damaged before the other parts of the membrane.
3、聯接件應傳力牢靠，并削減聯接處應力會集。
3, joint force should be firm, and cut joint stress convergence.
4、節點構造應契合計算假定。應思考節點構造偏心對拉索、膜材發作的影響，施加預張力的辦法、構造裝置答應誤差，以及進行二次張拉的也許性。
4, node structure should be fit to calculate the assumption. The influence of the structure of the joints on the attack of the cable and the membrane material, the method of pre tension, the error of the construction device, and the possibility of the two tensile stress should be considered.
5、在膜材聯接處應堅持高度水密性，應采取必定的構造辦法防止膜材磨損和撕裂。
5, at the junction of the membrane material should adhere to a high degree of water tightness, should take a certain structural measures to prevent the wear and tear of the film.
6、對金屬聯接件應選用牢靠的防腐蝕辦法。
6, the metal connection pieces should choose a reliable anti-corrosion measures.
7、在支承構件與膜材的聯接處不得有毛刺、尖角、尖點。
7, the connection point of the support member and the membrane material remove burrs and sharp edges, sharp point.
軟膜天花防火等級是多少？軟膜天花是由三個有些所構成的軟膜，扣邊條，龍骨。其間軟膜天花選用格外的資料制成，確保不含污染環境元素(鎘)，其防火等級為B1（我國），經過一次或屢次切開成形，并用高頻焊接完結，軟膜天花是要依照在實地丈量出的天花形狀及尺度在工廠里出產制造而成。軟膜天花扣邊條：是半硬質，揉捏成形的，選用資料，其防火等級為B1（我國），A級防火膜天花被焊接在天花軟膜的附近邊際，以張緊軟膜扣在墻碼條上,能夠到達完美縫合的作用。
How much is the piamater ceiling fire rating? Soft film smallpox is composed of three strips of some soft, buckle, keel. During the selection of extra soft film ceiling materials, to ensure that does not contain elements of environmental pollution (CD), the fire rating of B1 (China), after one or more open forming, and by high frequency welding end, soft film smallpox is to make production in the factory in accordance with the shape and scale of smallpox in the field of measurement and. Soft film smallpox buckle edge: is semi hard, kneading, forming material selection, the fire rating of B1 (China), a fireproof film is welded to the smallpox smallpox soft film near the margin, with tensioning buckle in soft wall bar code, can reach the perfect stitching effect.
配件：選用鋁合金制成，其防火等級為A1（我國）。拉膜天花有各式各樣適宜的不相同形狀，直的、彎的，有的是可被切開成適宜的視點后再裝置在一同，并被固定在室內天花的附近上，以用來扣住天花軟膜。
Accessories: the use of aluminum alloy, the fire rating of A1 (China). Film pulling with smallpox for every kind of different shapes, straight, curved, some can be cut into the appropriate view after the device together, and are fixed in the vicinity of the indoor ceiling, to fasten the smallpox soft film.
To enhance the quality and grade of soft film smallpox help you a helping hand film structure, support structure and the connecting structure should conform to the following specifications:
1、確保聯接的安全、合理、美麗。
1, to ensure that the connection is safe, reasonable and beautiful.
2、聯接件應具有足夠的強度、剛度和耐久性，應不先于所聯接的膜材、拉索或鋼構件損壞，并不發作影響構造受力功用的變形。聯接處的膜材應不先于其它部位的膜材損壞。
The 2 connecting parts should have sufficient strength, stiffness and durability, should not precede the membrane material and the connecting cable or steel parts damaged, does not attack force function of the influence of tectonic deformation. The membrane material of the joint should not be damaged before the other parts of the membrane.
3、聯接件應傳力牢靠，并削減聯接處應力會集。
3, joint force should be firm, and cut joint stress convergence.
4、節點構造應契合計算假定。應思考節點構造偏心對拉索、膜材發作的影響，施加預張力的辦法、構造裝置答應誤差，以及進行二次張拉的也許性。
4, node structure should be fit to calculate the assumption. The influence of the structure of the joints on the attack of the cable and the membrane material, the method of pre tension, the error of the construction device, and the possibility of the two tensile stress should be considered.
5、在膜材聯接處應堅持高度水密性，應采取必定的構造辦法防止膜材磨損和撕裂。
5, at the junction of the membrane material should adhere to a high degree of water tightness, should take a certain structural measures to prevent the wear and tear of the film.
6、對金屬聯接件應選用牢靠的防腐蝕辦法。 7、在支承構件與膜材的聯接處不得有毛刺、尖角、尖點。
6, the metal connection pieces should choose a reliable anti-corrosion measures. 7, the connection point of the support member and the membrane material remove burrs and sharp edges, sharp point.
膜構造的支承構造和各項聯接構造應契合以下規范：
The supporting structure of the membrane structure and the connection structure should meet the following specifications:
1、確保聯接的安全、合理、美麗。
1, to ensure that the connection is safe, reasonable and beautiful.
2、聯接件應具有足夠的強度、剛度和耐久性，應不先于所聯接的膜材、拉索或鋼構件損壞，并不發作影響構造受力功用的變形。聯接處的膜材應不先于其它部位的膜材損壞。
The 2 connecting parts should have sufficient strength, stiffness and durability, should not precede the membrane material and the connecting cable or steel parts damaged, does not attack force function of the influence of tectonic deformation. The membrane material of the joint should not be damaged before the other parts of the membrane.
3、聯接件應傳力牢靠，并削減聯接處應力會集。
3, joint force should be firm, and cut joint stress convergence.
4、節點構造應契合計算假定。應思考節點構造偏心對拉索、膜材發作的影響，施加預張力的辦法、構造裝置答應誤差，以及進行二次張拉的也許性。
4, node structure should be fit to calculate the assumption. The influence of the structure of the joints on the attack of the cable and the membrane material, the method of pre tension, the error of the construction device, and the possibility of the two tensile stress should be considered.
5、在膜材聯接處應堅持高度水密性，應采取必定的構造辦法防止膜材磨損和撕裂。
5, at the junction of the membrane material should adhere to a high degree of water tightness, should take a certain structural measures to prevent the wear and tear of the film.
6、對金屬聯接件應選用牢靠的防腐蝕辦法。
6, the metal connection pieces should choose a reliable anti-corrosion measures.
7、在支承構件與膜材的聯接處不得有毛刺、尖角、尖點。
7, the connection point of the support member and the membrane material remove burrs and sharp edges, sharp point.
軟膜天花防火等級是多少？軟膜天花是由三個有些所構成的軟膜，扣邊條，龍骨。其間軟膜天花選用格外的資料制成，確保不含污染環境元素(鎘)，其防火等級為B1（我國），經過一次或屢次切開成形，并用高頻焊接完結，軟膜天花是要依照在實地丈量出的天花形狀及尺度在工廠里出產制造而成。軟膜天花扣邊條：是半硬質，揉捏成形的，選用資料，其防火等級為B1（我國），A級防火膜天花被焊接在天花軟膜的附近邊際，以張緊軟膜扣在墻碼條上,能夠到達完美縫合的作用。
How much is the piamater ceiling fire rating? Soft film smallpox is composed of three strips of some soft, buckle, keel. During the selection of extra soft film ceiling materials, to ensure that does not contain elements of environmental pollution (CD), the fire rating of B1 (China), after one or more open forming, and by high frequency welding end, soft film smallpox is to make production in the factory in accordance with the shape and scale of smallpox in the field of measurement and. Soft film smallpox buckle edge: is semi hard, kneading, forming material selection, the fire rating of B1 (China), a fireproof film is welded to the smallpox smallpox soft film near the margin, with tensioning buckle in soft wall bar code, can reach the perfect stitching effect.
配件：選用鋁合金制成，其防火等級為A1（我國）。拉膜天花有各式各樣適宜的不相同形狀，直的、彎的，有的是可被切開成適宜的視點后再裝置在一同，并被固定在室內天花的附近上，以用來扣住天花軟膜。
Accessories: the use of aluminum alloy, the fire rating of A1 (China). Film pulling with smallpox for every kind of different shapes, straight, curved, some can be cut into the appropriate view after the device together, and are fixed in the vicinity of the indoor ceiling, to fasten the smallpox soft film.